Low fender mounting kit for use with the Eagle fork brace. Four spacers, bolts and washers to mount a fender on the Eagle fork brace. A stock fender can be used, but it is not the best for this application. The stock fenders are very good air scoops. :) If you are using the stock size (21") diamter wheel, the fender must be mounted above the brace. You will need to scallop the side of the fender to clear the brace, wtih the spacers placed between the fender and the brace. The fender is still plenty strong and works well in the position. In hot weather it can also allow the engine to run cooler.